RFID Reader

Main Features: Supporting EM-ID 125kHz or Mifare 13.56MHz technology, Wigand 26, 34, RS232 Or RS485 Interface

Specification:
*Wiegand 26bits/ Wiegand34bits /ABA/RS232/RS485 Standard Format Data Output
*Less than 0.2 second Response Speed
*Less than 0.5 seconds
Proximity Time Distance:
*5-15cm Proximity Range
*Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)
*-25 C to 75 CAmbient Temperature, 10%-90% Ambient Humidity

*Built-in Antenna
*Built-in LED (Double Color LED)
*Built-in Loud Speaker (Buzzer)
*DC 12V Working Voltage, 70mA Working Current
*100 Meters Communication Distance
*Real Time Data Transfer
*Black Color
*PVC Case Material (Black Resin for Water-Proof Function)
*126*86*23(mm)

Installation:
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection:
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm

Notice:
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply.
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND.
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.